10 Slide-Out Features

Slide-Out Overview

General Considerations

The rear slide-out room(s) are operated by a screen... slideout-room feature is actuated by a screen…

For other screens, use the Spyder Controls System (Figure 10-1). The switch must be manually held down in the desired position (either IN or OUT) to activate the desired action of the slide-out room and continue to be held down until the desired action is concluded.

Remote switches to operate the front slide-out rooms are located on the shade leg of the cockpit side overhead cabinets on either side of the motorhome (Figure 10-2).

Operating Precautions

Before the slide-out-room mechanism is used, make sure the motorhome is parked, and the leveling process has been properly completed. Verify that no obstacles (branches, trees, telephone poles, power/water hookups, trash bins, etc.) are within a five-foot space envelope of the slide-out room, to keep from damaging the slide-out room when it is finally deployed.

Extending the Slide-Out Room

1. Any loose materials or possible obstructions, such as rugs or furniture, should be removed from the immediate, slide-out room area. Make sure that the motorhome has been leveled, that the battery is fully charged and connected to the electrical system, and that the ignition switch is “on” and the engine is running before attempt-ing to use the slide-out features.

2. Verify that there are no obstructions outside that may interfere with the operation of the slide-out room.
3. Prior to moving the slide-out room in either direction, make sure that the driver’s and passenger’s chairs are moved forward into the driving area as far as possible and locked into position.
4. Make sure the ignition switch is on the “on” position and the parking brake is engaged.
5. Push the “Extend” portion of switch and allow the slide-out room to go to its fully extended position. When fully extended, release the switch.

Retracting the Slide-Out Room

Before attempting to move the motorhome, the slide-out room must be fully retracted. Make sure the engine is running.

1. Before attempting to move the motorhome, the slide-out room must be fully retracted.
2. Verify that the 12 VDC system is fully charged and connected to the electrical system.
3. Make sure all personal equipment and any children are away from the slide-out.
4. Make sure all cabinet doors around the slide-out areas are closed.
5. Push the “in” section of the switch; allow the slide-out room to go to its fully retracted position.
6. Release the switch (this locks the room into position).