Skip to main content
TIFFIN MOTORHOMES - SAP

04 LP Gas System

 

clipboard_efa1f56379e6e9ca60d2ec3a33c77d9c8.png

LP Tank Filling and Monitoring 

Any LP gas tank associated with the motorhome must never be filled to more than 80 percent of its total capacity. Filling should always be done only when the motorhome is leveled. If the motorhome is not level, the tank might be overfilled (i.e., more than 80 percent of capacity) and, thus, present an unsafe situation. When the tank is full (80% of capacity) the SPYDER Control System will indicate that the tank is “FULL.” For reference purposes, there are four horizontal on the single SPYDER gauge columns representing the approximate amount of fuel remaining in tank. The four columns shown to the left are representative of what the single column would look like at difference capacities.

clipboard_e9a8b2b297368c54e9cb49af2be23bb21.png

clipboard_e3901e0596776d0f9a2e646e38fb49df5.png

clipboard_ee549de1c0df49fecb179ac23c17fc4dc.png

  • Was this article helpful?