Airxcel A/C Unit Operation Guide

Operation

The ceiling assembly display indicates the mode and the room temperature. When the mode button is pressed once, the ceiling assembly display will wake and the backlight will illuminate. When the mode button  is pressed again, the mode will change. Press the  button to wake the thermostat; the set temperature will display and the mode will flash. Press thebutton again to change the set temperature. The thermostat will return to sleep mode after 5 seconds if no button is pressed.

There is a three minute anti-short cycle for cooling. After the cooling system has been de-energized, the system will not energize again for three minute, to protect your compressor. To bypass the anti-short cycle change the mode to OFF.

Note: Operating your cooling system when the outdoor temperature is below 50' F can cause damage to your cooling equipment.